New to Linux - Problem connecting with wireless- help!
Hi I've installed Ubuntu version 9.04 on a brand new PC, with a TP Link wireless card TL-WN851N card, I cannot get it to connect.
The card seems to pick up my wireless connection and tries to connect, but after a short period my whole system freezes and I have to turn it off at the power. This problem ceases if I disable wireless.
I assumed this was a driver problem, I downloaded and installed compat wireless, which informed me ubuntu was using the ath9k driver. I have tried uninsalling this and replacing it with the ath5k driver. However this doesn't pick up my wireless card at all.
I have since reinstalled ubuntu, any help would be greatly appreciated, this is the information which I believe will be of use:
Kernel version: 2.6.8.11-generic
Card info:
01:06.0 Network controller [0280]: Atheros Communications Inc. AR5008 Wireless Network Adapter [168c:0023] (rev 01)
Driver modules:
:~$ lsmod
Module Size Used by
binfmt_misc 18572 1
bridge 63904 0
stp 11140 1 bridge
bnep 22912 2
input_polldev 12688 0
video 29204 0
output 11648 1 video
lp 19588 0
arc4 10240 2
ecb 11392 2
snd_hda_intel 557364 3
snd_pcm_oss 52352 0
snd_mixer_oss 24960 1 snd_pcm_oss
snd_pcm 99336 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 11524 0
snd_seq_oss 41984 0
snd_seq_midi 15744 0
snd_rawmidi 33920 1 snd_seq_midi
snd_seq_midi_event 16512 2 snd_seq_oss,snd_seq_midi
ath9k 288568 0
snd_seq 66272 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
mac80211 251144 1 ath9k
snd_timer 34064 2 snd_pcm,snd_seq
snd_seq_device 16276 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
cfg80211 43168 1 mac80211
snd 78792 15 snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
soundcore 16800 1 snd
ppdev 16904 0
led_class 13064 1 ath9k
snd_page_alloc 18704 2 snd_hda_intel,snd_pcm
pcspkr 11136 0
parport_pc 45096 1
parport 49584 3 lp,ppdev,parport_pc
forcedeth 68368 0
usbhid 47040 0
floppy 75816 0
fbcon 49792 0
tileblit 11264 1 fbcon
font 17024 1 fbcon
bitblit 14464 1 fbcon
softcursor 10368 1 bitblit
Potential error codes?:
0.595024] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 0.595291] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 0.595558] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 0.595825] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 0.596118] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 0.596385] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 0.596657] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 0.596924] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 0.597192] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 0.597460] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 0.597731] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 0.597998] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 0.598265] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 0.598532] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 0.598799] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 0.599069] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 0.599339] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 0.599607] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 0.599874] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 0.600159] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 0.600427] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 0.600694] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 0.600962] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 0.601229] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 0.601496] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 0.601763] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 0.602031] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 0.602298] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 0.602565] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 0.602832] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 0.603103] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.603374] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15
[ 0.603645] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 0.603916] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15
[ 0.604208] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[ 0.604479] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
[ 0.604750] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10
[ 0.605021] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 0.605337] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.605609] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11
[ 0.605881] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[ 0.605990] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 22, should be 15 [20080926]
[ 0.606107] ACPI: WMI: Mapper loaded
[ 0.606138] SCSI subsystem initialized
[ 0.606138] libata version 3.00 loaded.
[ 0.606138] usbcore: registered new interface driver usbfs
[ 0.606138] usbcore: registered new interface driver hub
[ 0.606138] usbcore: registered new device driver usb
[ 0.606138] PCI: Using ACPI for IRQ routing
[ 0.620009] Bluetooth: Core ver 2.13
[ 0.620020] NET: Registered protocol family 31
[ 0.620020] Bluetooth: HCI device and connection manager initialized
[ 0.620020] Bluetooth: HCI socket layer initialized
[ 0.620020] NET: Registered protocol family 8
[ 0.620020] NET: Registered protocol family 20
[ 0.620022] NetLabel: Initializing
[ 0.620024] NetLabel: domain hash size = 128
[ 0.620025] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.620034] NetLabel: unlabeled traffic allowed by default
[ 0.620257] PCI-DMA: Disabling AGP.
[ 0.620307] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.620308] PCI-DMA: using GART IOMMU.
[ 0.620310] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.621938] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.621942] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.636056] AppArmor: AppArmor Filesystem Enabled
[ 0.640014] Switched to high resolution mode on CPU 0
[ 0.640017] Switched to high resolution mode on CPU 2
[ 0.640021] Switched to high resolution mode on CPU 1
[ 0.640027] Switched to high resolution mode on CPU 3
[ 0.648214] pnp: PnP ACPI init
[ 0.648228] ACPI: bus type pnp registered
[ 0.651594] pnp 00:06: io resource (0x900-0x97f) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.651596] pnp 00:06: io resource (0x980-0x9ff) overlaps 0000:00:01.0 BAR 0 (0x900-0x9ff), disabling
[ 0.657767] pnp: PnP ACPI: found 15 devices
[ 0.657768] ACPI: ACPI bus type pnp unregistered
[ 0.657777] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[ 0.657778] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.657780] system 00:06: ioport range 0x500-0x57f has been reserved
[ 0.657782] system 00:06: ioport range 0x580-0x5ff has been reserved
[ 0.657784] system 00:06: ioport range 0x800-0x87f could not be reserved
[ 0.657786] system 00:06: ioport range 0x880-0x8ff has been reserved
[ 0.657788] system 00:06: ioport range 0xd00-0xd7f has been reserved
[ 0.657791] system 00:06: ioport range 0xd80-0xdff has been reserved
[ 0.657793] system 00:06: iomem range 0xfed04000-0xfed04fff has been reserved
[ 0.657795] system 00:06: iomem range 0xfee01000-0xfeefffff has been reserved
[ 0.657799] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.657801] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.657804] system 00:0b: ioport range 0x230-0x23f has been reserved
[ 0.657806] system 00:0b: ioport range 0x290-0x29f has been reserved
[ 0.657808] system 00:0b: ioport range 0xa00-0xa0f has been reserved
[ 0.657809] system 00:0b: ioport range 0xa10-0xa1f has been reserved
[ 0.657813] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.657816] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 0.657818] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
[ 0.657820] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 0.657821] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
[ 0.657823] system 00:0e: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.662455] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[ 0.662457] pci 0000:00:08.0: IO window: disabled
[ 0.662460] pci 0000:00:08.0: MEM window: 0xf9f00000-0xf9ffffff
[ 0.662462] pci 0000:00:08.0: PREFETCH window: disabled
[ 0.662466] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.662470] pci 0000:00:10.0: IO window: 0xe000-0xefff
[ 0.662479] pci 0000:00:10.0: MEM window: 0xfa000000-0xfebfffff
[ 0.662485] pci 0000:00:10.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.662497] pci 0000:00:12.0: PCI bridge, secondary bus 0000:03
[ 0.662498] pci 0000:00:12.0: IO window: disabled
[ 0.662507] pci 0000:00:12.0: MEM window: disabled
[ 0.662513] pci 0000:00:12.0: PREFETCH window: disabled
[ 0.662525] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[ 0.662526] pci 0000:00:13.0: IO window: disabled
[ 0.662535] pci 0000:00:13.0: MEM window: disabled
[ 0.662541] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.662556] pci 0000:00:08.0: setting latency timer to 64
[ 0.662940] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[ 0.662947] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[ 0.662955] pci 0000:00:10.0: setting latency timer to 64
[ 0.663332] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 18
[ 0.663339] pci 0000:00:12.0: PCI INT A -> Link[LN2A] -> GSI 18 (level, low) -> IRQ 18
[ 0.663346] pci 0000:00:12.0: setting latency timer to 64
[ 0.663720] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 17
[ 0.663726] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 17 (level, low) -> IRQ 17
[ 0.663733] pci 0000:00:13.0: setting latency timer to 64
[ 0.663738] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.663739] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.663741] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.663742] bus: 01 index 1 mmio: [0xf9f00000-0xf9ffffff]
[ 0.663744] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.663745] bus: 01 index 3 io port: [0x00-0xffff]
[ 0.663746] bus: 01 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.663748] bus: 02 index 0 io port: [0xe000-0xefff]
[ 0.663749] bus: 02 index 1 mmio: [0xfa000000-0xfebfffff]
[ 0.663750] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff]
[ 0.663751] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.663753] bus: 03 index 0 mmio: [0x0-0x0]
[ 0.663754] bus: 03 index 1 mmio: [0x0-0x0]
[ 0.663755] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.663756] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.663757] bus: 04 index 0 mmio: [0x0-0x0]
[ 0.663758] bus: 04 index 1 mmio: [0x0-0x0]
[ 0.663759] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.663760] bus: 04 index 3 mmio: [0x0-0x0]
[ 0.663768] NET: Registered protocol family 2
[ 0.696103] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.696565] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.697358] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.697662] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.697664] TCP reno registered
[ 0.708086] NET: Registered protocol family 1
[ 0.708172] checking if image is initramfs... it is
[ 1.098392] Freeing initrd memory: 7762k freed
[ 1.100687] audit: initializing netlink socket (disabled)
[ 1.100701] type=2000 audit(1241395606.100:1): initialized
[ 1.106258] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.107107] VFS: Disk quotas dquot_6.5.1
[ 1.107141] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.107490] fuse init (API version 7.10)
[ 1.107536] msgmni has been set to 15787
[ 1.107676] alg: No test for stdrng (krng)
[ 1.107687] io scheduler noop registered
[ 1.107689] io scheduler anticipatory registered
[ 1.107690] io scheduler deadline registered
[ 1.107713] io scheduler cfq registered (default)
[ 1.157809] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 1.157837] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 1.157865] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.157894] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 1.157948] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.158013] pci 0000:00:12.0: Enabling HT MSI Mapping
[ 1.158078] pci 0000:00:13.0: Enabling HT MSI Mapping
[ 1.158150] pci 0000:02:00.0: Boot video device
[ 1.170074] pcieport-driver 0000:00:10.0: setting latency timer to 64
[ 1.170242] pcieport-driver 0000:00:10.0: found MSI capability
[ 1.170323] pcieport-driver 0000:00:10.0: irq 2303 for MSI/MSI-X
[ 1.170355] pci_express 0000:00:10.0:pcie00: allocate port service
[ 1.170527] pcieport-driver 0000:00:12.0: setting latency timer to 64
[ 1.170693] pcieport-driver 0000:00:12.0: found MSI capability
[ 1.170770] pcieport-driver 0000:00:12.0: irq 2302 for MSI/MSI-X
[ 1.170802] pci_express 0000:00:12.0:pcie00: allocate port service
[ 1.170972] pcieport-driver 0000:00:13.0: setting latency timer to 64
[ 1.171138] pcieport-driver 0000:00:13.0: found MSI capability
[ 1.171215] pcieport-driver 0000:00:13.0: irq 2301 for MSI/MSI-X
[ 1.171247] pci_express 0000:00:13.0:pcie00: allocate port service
[ 1.171386] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.171391] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.171492] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 1.171494] ACPI: Power Button (FF) [PWRF]
[ 1.171523] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 1.171525] ACPI: Power Button (CM) [PWRB]
[ 1.171761] processor ACPI_CPU:00: registered as cooling_device0
[ 1.171782] processor ACPI_CPU:01: registered as cooling_device1
[ 1.171800] processor ACPI_CPU:02: registered as cooling_device2
[ 1.171822] processor ACPI_CPU:03: registered as cooling_device3
[ 1.205995] Linux agpgart interface v0.103
[ 1.206003] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.206086] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.206297] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.206702] brd: module loaded
[ 1.206865] loop: module loaded
[ 1.206905] Fixed MDIO Bus: probed
[ 1.206909] PPP generic driver version 2.4.2
[ 1.206943] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 1.206961] Driver 'sd' needs updating - please use bus_type methods
[ 1.206967] Driver 'sr' needs updating - please use bus_type methods
[ 1.206991] ahci 0000:00:09.0: version 3.0
[ 1.207377] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 1.207385] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23
[ 1.207429] ahci 0000:00:09.0: irq 2300 for MSI/MSI-X
[ 1.207483] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 1.207486] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
[ 1.207488] ahci 0000:00:09.0: setting latency timer to 64
[ 1.207821] scsi0 : ahci
[ 1.207885] scsi1 : ahci
[ 1.207924] scsi2 : ahci
[ 1.207963] scsi3 : ahci
[ 1.208000] scsi4 : ahci
[ 1.208045] scsi5 : ahci
[ 1.208106] ata1: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76100 irq 2300
[ 1.208108] ata2: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76180 irq 2300
[ 1.208110] ata3: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76200 irq 2300
[ 1.208112] ata4: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76280 irq 2300
[ 1.208114] ata5: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76300 irq 2300
[ 1.208116] ata6: SATA max UDMA/133 abar m8192@0xf9e76000 port 0xf9e76380 irq 2300
[ 1.688113] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.689508] ata1.00: ATA-8: Hitachi HDT721032SLA360, ST2OA31B, max UDMA/133
[ 1.689510] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.691314] ata1.00: configured for UDMA/133
[ 2.576312] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.578103] ata2.00: ATAPI: HL-DT-STDVD-RAM GH22LS30, 1.01, max UDMA/100
[ 2.579909] ata2.00: configured for UDMA/100
[ 2.900117] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.220241] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.540304] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.860057] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.860132] scsi 0:0:0:0: Direct-Access ATA Hitachi HDT72103 ST2O PQ: 0 ANSI: 5
[ 3.860184] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.860194] sd 0:0:0:0: [sda] Write Protect is off
[ 3.860195] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.860208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.860247] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[ 3.860254] sd 0:0:0:0: [sda] Write Protect is off
[ 3.860256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.860268] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.860270] sda: sda1 sda2 < sda5 >
[ 3.901196] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.901224] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.902690] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22LS30 1.01 PQ: 0 ANSI: 5
[ 3.906721] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.906723] Uniform CD-ROM driver Revision: 3.20
[ 3.906769] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.906792] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.906922] pata_amd 0000:00:06.0: version 0.3.10
[ 3.906947] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.907020] scsi6 : pata_amd
[ 3.907058] scsi7 : pata_amd
[ 3.907871] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.907873] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.071203] ata8: port disabled. ignoring.
[ 4.071467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.071853] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 4.071861] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22
[ 4.071869] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 4.071871] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 4.071903] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 4.071924] ehci_hcd 0000:00:02.1: debug port 1
[ 4.071927] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 4.071941] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf9e7fc00
[ 4.080127] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 4.080172] usb usb1: configuration #1 chosen from 1 choice
[ 4.080189] hub 1-0:1.0: USB hub found
[ 4.080194] hub 1-0:1.0: 6 ports detected
[ 4.080621] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[ 4.080628] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[ 4.080633] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 4.080635] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 4.080659] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 4.080678] ehci_hcd 0000:00:04.1: debug port 1
[ 4.080680] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 4.080694] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf9e7f800
[ 4.092054] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 4.092088] usb usb2: configuration #1 chosen from 1 choice
[ 4.092101] hub 2-0:1.0: USB hub found
[ 4.092105] hub 2-0:1.0: 6 ports detected
[ 4.092513] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 16
[ 4.092519] ehci_hcd 0000:01:07.2: PCI INT C -> Link[LNKD] -> GSI 16 (level, low) -> IRQ 16
[ 4.092525] ehci_hcd 0000:01:07.2: EHCI Host Controller
[ 4.092549] ehci_hcd 0000:01:07.2: new USB bus registered, assigned bus number 3
[ 4.116309] ehci_hcd 0000:01:07.2: irq 16, io mem 0xf9fefc00
[ 4.128313] ehci_hcd 0000:01:07.2: USB 2.0 started, EHCI 1.00
[ 4.128341] usb usb3: configuration #1 chosen from 1 choice
[ 4.128354] hub 3-0:1.0: USB hub found
[ 4.128358] hub 3-0:1.0: 5 ports detected
[ 4.128408] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.128781] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 20
[ 4.128787] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 20 (level, low) -> IRQ 20
[ 4.128793] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 4.128795] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.128819] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 4
[ 4.128836] ohci_hcd 0000:00:02.0: irq 20, io mem 0xf9e7e000
[ 4.187538] usb usb4: configuration #1 chosen from 1 choice
[ 4.187555] hub 4-0:1.0: USB hub found
[ 4.187560] hub 4-0:1.0: 6 ports detected
[ 4.187968] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 23
[ 4.187970] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 23 (level, low) -> IRQ 23
[ 4.187976] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 4.187978] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 4.188001] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 5
[ 4.188020] ohci_hcd 0000:00:04.0: irq 23, io mem 0xf9e7d000
[ 4.242123] usb usb5: configuration #1 chosen from 1 choice
[ 4.242137] hub 5-0:1.0: USB hub found
[ 4.242143] hub 5-0:1.0: 6 ports detected
[ 4.242566] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 4.242568] ohci_hcd 0000:01:07.0: PCI INT A -> Link[LNKB] -> GSI 19 (level, low) -> IRQ 19
[ 4.242575] ohci_hcd 0000:01:07.0: OHCI Host Controller
[ 4.242598] ohci_hcd 0000:01:07.0: new USB bus registered, assigned bus number 6
[ 4.242616] ohci_hcd 0000:01:07.0: irq 19, io mem 0xf9fed000
[ 4.327407] usb usb6: configuration #1 chosen from 1 choice
[ 4.327421] hub 6-0:1.0: USB hub found
[ 4.327426] hub 6-0:1.0: 3 ports detected
[ 4.327831] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 18
[ 4.327833] ohci_hcd 0000:01:07.1: PCI INT B -> Link[LNKC] -> GSI 18 (level, low) -> IRQ 18
[ 4.327840] ohci_hcd 0000:01:07.1: OHCI Host Controller
[ 4.327862] ohci_hcd 0000:01:07.1: new USB bus registered, assigned bus number 7
[ 4.327882] ohci_hcd 0000:01:07.1: irq 18, io mem 0xf9fee000
[ 4.392034] usb 1-5: new high speed USB device using ehci_hcd and address 2
[ 4.410006] usb usb7: configuration #1 chosen from 1 choice
[ 4.410019] hub 7-0:1.0: USB hub found
[ 4.410024] hub 7-0:1.0: 2 ports detected
[ 4.410069] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.410112] usbcore: registered new interface driver libusual
[ 4.410129] usbcore: registered new interface driver usbserial
[ 4.410135] USB Serial support registered for generic
[ 4.527772] usb 1-5: configuration #1 chosen from 1 choice
[ 4.888014] usb 5-3: new low speed USB device using ohci_hcd and address 2
[ 5.102246] usb 5-3: configuration #1 chosen from 1 choice
[ 5.105480] usbcore: registered new interface driver usbserial_generic
[ 5.105482] usbserial: USB Serial Driver core
[ 5.105507] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 5.105509] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 5.105575] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 5.117731] mice: PS/2 mouse device common for all mice
[ 5.153713] rtc_cmos 00:08: RTC can wake from S4
[ 5.153732] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 5.153783] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 5.153818] device-mapper: uevent: version 1.0.3
[ 5.153879] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 5.153988] device-mapper: multipath: version 1.0.5 loaded
[ 5.153990] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 5.154108] cpuidle: using governor ladder
[ 5.154109] cpuidle: using governor menu
[ 5.154359] TCP cubic registered
[ 5.154401] NET: Registered protocol family 10
[ 5.154642] lo: Disabled Privacy Extensions
[ 5.154814] NET: Registered protocol family 17
[ 5.154824] Bluetooth: L2CAP ver 2.11
[ 5.154825] Bluetooth: L2CAP socket layer initialized
[ 5.154827] Bluetooth: SCO (Voice Link) ver 0.6
[ 5.154828] Bluetooth: SCO socket layer initialized
[ 5.154878] Bluetooth: RFCOMM socket layer initialized
[ 5.154882] Bluetooth: RFCOMM TTY layer initialized
[ 5.154883] Bluetooth: RFCOMM ver 1.10
[ 5.154939] powernow-k8: Found 1 AMD Phenom(tm) II X4 920 Processor processors (4 cpu cores) (version 2.20.00)
[ 5.154971] powernow-k8: 0 : pstate 0 (2800 MHz)
[ 5.154973] powernow-k8: 1 : pstate 1 (2100 MHz)
[ 5.154975] powernow-k8: 2 : pstate 2 (1600 MHz)
[ 5.154976] powernow-k8: 3 : pstate 3 (800 MHz)
[ 5.155192] registered taskstats version 1
[ 5.155277] Magic number: 9:353:101
[ 5.155369] rtc_cmos 00:08: setting system clock to 2009-05-04 00:06:51 UTC (1241395611)
[ 5.155371] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 5.155373] EDD information not available.
[ 5.155404] Freeing unused kernel memory: 536k freed
[ 5.155551] Write protecting the kernel read-only data: 6708k
[ 5.171936] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 5.270894] Floppy drive(s): fd0 is 1.44M
[ 5.287914] FDC 0 is a post-1991 82077
[ 5.291644] usbcore: registered new interface driver hiddev
[ 5.299408] input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:04.0/usb5/5-3/5-3:1.0/input/input4
[ 5.305739] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 5.306160] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[ 5.306164] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[ 5.306167] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 5.328310] generic-usb 0003:045E:00D1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:04.0-3/input0
[ 5.328326] usbcore: registered new interface driver usbhid
[ 5.328328] usbhid: v2.6:USB HID core driver
[ 5.370645] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 3, addr 00:23:54:d6:f1:ef
[ 5.370649] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
[ 5.477134] PM: Starting manual resume from disk
[ 5.477137] PM: Resume from partition 8:5
[ 5.477138] PM: Checking hibernation image.
[ 5.477233] PM: Resume from disk failed.
[ 5.526926] kjournald starting. Commit interval 5 seconds
[ 5.526934] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.715659] udev: starting version 141
[ 10.063258] parport_pc 00:05: reported by Plug and Play ACPI
[ 10.063304] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 10.081343] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 10.139043] ppdev: user-space parallel port driver
[ 10.205310] cfg80211: Calling CRDA to update world regulatory domain
[ 10.448513] cfg80211: World regulatory domain updated:
[ 10.448515] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.448517] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.448519] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.448520] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.448522] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.448523] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.498620] ath9k: 0.1
[ 10.499074] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17
[ 10.499077] ath9k 0000:01:06.0: PCI INT A -> Link[LNKA] -> GSI 17 (level, low) -> IRQ 17
[ 10.581235] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[ 10.581627] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 10.581630] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 10.581669] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 10.923512] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 10.949897] Registered led device: ath9k-phy0:radio
[ 10.949910] Registered led device: ath9k-phy0:assoc
[ 10.949921] Registered led device: ath9k-phy0:tx
[ 10.949932] Registered led device: ath9k-phy0:rx
[ 10.950495] phy0: Atheros 5416: mem=0xffffc20010200000, irq=17
[ 11.515568] lp0: using parport0 (interrupt-driven).
[ 11.567867] Adding 12699340k swap on /dev/sda5. Priority:-1 extents:1 across:12699340k
[ 12.093285] EXT3 FS on sda1, internal journal
[ 12.907819] type=1505 audit(1241395619.248:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2393
[ 12.933788] type=1505 audit(1241395619.276:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2397
[ 12.933848] type=1505 audit(1241395619.276:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2397
[ 12.933875] type=1505 audit(1241395619.276:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2397
[ 12.933899] type=1505 audit(1241395619.276:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2397
[ 13.005985] type=1505 audit(1241395619.348:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2402
[ 13.006083] type=1505 audit(1241395619.348:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2402
[ 13.022524] type=1505 audit(1241395619.364:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2406
[ 15.671566] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.671568] Bluetooth: BNEP filters: protocol multicast
[ 15.690691] Bridge firewalling registered
[ 21.655486] forcedeth 0000:00:0a.0: irq 2299 for MSI/MSI-X
[ 21.678411] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 31.720257] eth0: no IPv6 routers present
[ 136.613506] ppdev0: registered pardevice
[ 136.657302] ppdev0: unregistered pardevice
[ 136.735968] ppdev0: registered pardevice
[ 136.780124] ppdev0: unregistered pardevice
[ 136.794653] ppdev0: registered pardevice
[ 136.841981] ppdev0: unregistered pardevice
[ 432.500376] CE: hpet increasing min_delta_ns to 15000 nsec
Powered by
Ploneboard
Help and Advice (Reg)
